Ref No. : 8R0407271G
Name: drive shaft
Brand: Borsehung
Applicable models: Audi Q5
Basic introduction of drive shaft:
The 8R0407271G is a shaft capable of transmitting power among the 8R0407271Gs of the universal transmission. It is a high-speed, low-support rotating body, so its dynamic balance is crucial. Generally, the 8R0407271G is tested for dynamic balance before leaving the factory, and adjusted on the balancer. For front-engine rear-wheel-drive cars, the transmission’s rotation is transmitted to the shaft of the main reducer, which can be several sections, and the joints can be connected by universal joints.
8R0407271G maintenance
In order to ensure the normal operation of the 8R0407271G and prolong its service life, it should be noted in use:
1.It is strictly forbidden for cars to start at high speed.
2.Never lift the clutch pedal violently.
3.Cars are strictly prohibited from overloading and speeding.
4.The working condition of the 8R0407271G should be checked frequently.
5.Always check the fastening of the 8R0407271G hanger, whether the supporting rubber is damaged, whether the connection parts of the 8R0407271G are loose, and whether the 8R0407271G is deformed.
6.In order to ensure the dynamic balance of the 8R0407271G, pay attention to whether the balance pads are de-soldered. The new 8R0407271G assembly is provided as a set. When installing the new 8R0407271G, pay attention to the assembly mark of the telescopic sleeve, and ensure that the flange fork is in a plane. When repairing and disassembling the 8R0407271G, the assembly mark should be printed on the telescopic sleeve and the flange shaft in order to maintain the original assembly relationship when reassembling.
Purchase link：https://www.borsehung.de/en/service-form/
